Influence of initial heeling angle on ship roll motion response北大核心CSCD

[目的]系统地研究初始横倾角对随机横浪下船舶横摇运动响应的影响。[方法]以路径积分法为基础,通过数值求解控制横摇运动微分方程概率属性的Fokker-Planck方程,得到横摇运动响应的概率分布。[结果]结果显示,初始横倾角对船舶横摇运动响应谱的影响有限,但对横摇角概率分布以及横摇运动响应极值分布的影响十分明显,且会造成船舶安全性的显著恶化。[结论]路径积分法可作为研究随机海浪下船舶横摇运动特性的有效数值方法。     

液压升降装置机液伺服系统响应特性分析

本文针对大惯量、大功率特性的液压升降装置起动时，存在快速响应和稳定性较难兼顾的突出问题，分析了阀控柱塞缸特性及机液伺服系统原理，建立了机液伺服系统的控制数学模型，运用经典控制理论分析方法，得出系统开环、闭环传递函数，并在时域内开展了阶跃信号输入下的系统响应特性分析，明确了影响系统性能的参数设计原则，为实际工程设计提供理论依据。     

粘弹性人工边界在地下结构抗震分析中的应用

地下结构地震反应分析需考虑结构-地基的动力相互作用,其中场地土层的自由场反应分析是确定地震输入的关键问题。以往地下工程实例表明,在结构动力时程计算中,能否有效模拟无限地基边界对结构抗震分析有很大的影响。基于某地下综合体项目进行抗震评估,采用黏弹性人工边界模拟自由场震动响应,克服工程中传统分析里不能模拟场地无限域的缺点。为地下结构的动力时程分析提供可靠数值依据。     

列车动力响应的平稳性和各态历经性分析

研究列车动力响应的平稳性和各态历经性对寻求列车动力响应随机过程的统计规律具有重要意义。基于多体动力学理论,采用多体动力学分析软件Simpack建立国内某高速列车动车车辆的多体动力学模型。采用三角级数法模拟得到的轨道不平顺作为随机输入激励计算得到列车以不同速度行驶不同距离的动力响应时程样本序列。进一步运用平稳性检验方法中的逆序数检验法和单位根检验法对列车动力响应随机过程的平稳性进行检验。运用Monte-Carlo方法并结合随机过程的相关理论,计算1 500个在随机轨道不平顺激励下列车以200 km/h速度行驶1 km工况的动力响应时程样本序列的集合均值和集合相关函数,时间均值和时间相关函数,对列车动力响应的平稳性和各态历经性进行了证明。研究结果表明,列车以200 km/h的速度行驶1 km工况的动力响应可近似为具有各态历经性的平稳随机过程,即可采用一个时程响应样本来反映列车动力响应总体的统计规律。随着列车动力响应样本个数的增加,列车动力响应的平稳性和各态历经性都将更加稳定。     

Numerical study on the dynamic response of a truncated ship-hull structure under asymmetrical slamming

Dynamic response of ship-hull structure under slamming has tracked widespread attention in the marine structural design. However, our understanding on the dynamic characteristics largely relies on the symmetrical slamming cases. This paper presented a preliminary numerical investigation on the dynamic response of a truncated ship-hull structure under asymmetrical slamming based on the uncoupled CFD-FE method. Asymmetrical slamming loads were predicted through combining the seakeeping analysis and CFD method. In there, three kinds of motions (vertical, horizontal and roll motions) of 2D ship sections were obtained through the seakeeping analysis and then the slamming pressure was predicted through simulating the water entry with various motions based on CFD method. The dynamic response was analyzed through finite element method. Numerical predictions including ship motions, slamming loads and dynamic analysis were validated against published experimental data and numerical calculations. The characteristics of asymmetrical slamming loads were analyzed showing obvious asymmetry in space, and the dynamic characteristic of the ship bow structure was further clarified through discussing the deformation and stress distribution. These results are useful for readers for better understanding the dynamic characteristics of the bow structure under slamming.     

某磁浮大跨斜拉桥竖向刚度限值研究

以某磁浮轨道交通(40+80+228+228+80+40)m大跨钢箱梁斜拉桥为研究对象,采用有限元软件ANSYS和多体动力学软件UM分别建立桥梁和磁浮列车模型。基于车桥耦合振动方法,针对2列磁浮列车相向行驶并在主跨跨中交会的最不利情形,进行列车以不同速度通过桥梁时不同梁高下车桥系统的动力响应及磁浮大跨桥梁的竖向刚度限值研究。结果表明:磁浮列车的竖向动力响应随车速的增大而显著增大,时速从40 km增大到140 km时,列车竖向动力响应增幅达到120%以上;车体竖向加速度和Sperling指标不是桥梁结构刚度限值的控制因素;磁浮列车的悬浮间隙对梁体刚度变化较为敏感,随着梁体刚度逐步增大,悬浮间隙的波动变小,梁体挠跨比减小约25%,悬浮间隙波动减小幅度达35%,悬浮间隙可作为中低速磁浮大跨桥梁结构刚度限值的控制指标;梁体挠跨比1/3015可作为磁浮大跨桥梁的竖向刚度限值。     

两船并靠状态下的运动响应数值模拟研究

针对两船并靠工况复杂,各种运动相互间存在耦合的情况,基于三维势流理论和波浪的辐射/衍射理论,应用多体水动力学软件,建立了船体、护舷和缆绳的模型,开展了两船在风、浪、流作用下的运动响应数值模拟。模拟结果可作为并靠方案设计和优化的参考依据,也可为两船并靠状态下的护舷力学性能计算提供支撑。     

Bend stiffener linear viscoelastic thermo-mechanical analysis. Part I — Experimental characterization and mathematical formulation

Bend stiffeners are subjected to cyclic loading during offshore operation or when subjected to a controlled full-scale qualification test. Due to the viscoelastic nature of the polyurethane, energy is dissipated within the material volume and the structure may experience a temperature increase, a phenomenon known as self-heating. The top connection is a flexible riser critical region in terms of fatigue, being the bend stiffener the main responsible for curvature control. As the curvature distribution is highly affected by the nonlinear time–temperature bend stiffener response, a detailed thermo-mechanical assessment may become relevant for riser lifetime and polyurethane material failure assessment, specially during accelerated full-scale tests. In the present paper (Part I), the polyurethane experimental characterization and steady-state thermo-mechanical mathematical formulation are presented for the bend stiffener self-heating assessment. A steady-state formulation is derived for a temperature dependent linear viscoelastic large deflection beam model to estimate the heat generation during harmonic tip loading. The temperature field distribution is calculated through a three-dimensional steady-state thermal model considering the viscoelastic heat calculated from the mechanical model with an iterative scheme. Stress relaxation tests are performed at different temperatures to determine the viscoelastic properties followed by thermal properties characterization through differential scanning calorimetry and by the Flash method to determine the specific heat, thermal conductivity and diffusivity, respectively. In a companion paper (Part II) the iterative numerical scheme is detailed and a case study presented.     

On the fluid-structure response of elastic-plastic ship sides subjected to impact loads

This paper presents a simplified numerical model capable of analysing the interaction between the structural dynamic response of elastic-plastic struck plate wall of a fluid tank subjected to wedge impact and the resulting fluid motion. The Variational Finite Difference Method (VFDM) is applied to analyse the structural dynamics of the struck plate and 2-D linear potential flow theory is used to study the resulting fluid motion and its effects on the structural dynamics of the struck plate. Experiments of a wedge indenter impacting with both empty and 90% filled tanks are carried out to study the structural deformation of the struck plate. The accuracy of the developed numerical model is validated with published results and experimental results, and good agreement is achieved. Through the comparison of the impact behaviour of empty and partially filled water tank, it is found that the resulting water motion helps to reduce the structural deformation of the struck plate since part of the impact energy is dissipated by the resulting water motion. Parametric studies are performed to investigate the effect of impact velocity and water level on the structural dynamics of the struck plate of a partially filled water tank. A case study is also conducted to demonstrate the potential application of the proposed method in analysing ship-ice impact problems.     

美标高桩码头抗震计算位移法的对比

从原理和适用性的角度对美标高桩码头抗震计算方法进行对比,着重研究了位移法及其中的替代结构法。对替代结构法中推覆曲线的双折线化方式、阻尼比计算、反应谱衰减等影响因素进行分析。通过推覆分析和替代结构法计算变形能力和地震位移、复核码头抗震性能。结合实际案例,采用反应谱法和替代结构法对某高桩码头结构进行抗震分析。结果表明反应谱法趋于保守,不能反映塑性后的荷载衰减,相比而言替代结构法更为准确。而对于替代结构法,不同的等效阻尼比会较大程度影响地震位移结果。